Pokeys57cnc
4 posts
• Page 1 of 1
Pokeys57cnc
by chavadj » Thu May 10, 2018 1:19 am
Has anybody found an plugin or connected the pokeys57cnc to UCCNC ... it would be great!!
- chavadj
- Posts: 2
- Joined: Thu May 10, 2018 1:16 am
Re: Pokeys57cnc
by Robertspark » Thu May 10, 2018 10:59 am
https://www.poscope.com/product/pokeys57cnc/
Unfortunately that is not possible.
UCCNC only works with UC motion controllers.
if you wish to use UCCNC you will need to buy a UC motion controller.
That is the way it is designed and allows the software to be 100% compatible and developed for one set of USB and ethernet controllers.
I'd highly suggest you convert to UC motion controllers as they are lightyears ahead of Mach3 (for mill + plasma) which is no longer developed for years.
Unfortunately that is not possible.
UCCNC only works with UC motion controllers.
if you wish to use UCCNC you will need to buy a UC motion controller.
That is the way it is designed and allows the software to be 100% compatible and developed for one set of USB and ethernet controllers.
I'd highly suggest you convert to UC motion controllers as they are lightyears ahead of Mach3 (for mill + plasma) which is no longer developed for years.
UCCNC Macro Manual v1.2113 - https://drive.google.com/drive/folders/ ... sp=sharing
- Robertspark
- Posts: 1892
- Joined: Sat Sep 03, 2016 4:27 pm
Re: Pokeys57cnc
by ger21 » Thu May 10, 2018 2:10 pm
chavadj wrote:Has anybody found an plugin or connected the pokeys57cnc to UCCNC ... it would be great!!
No, it would be just like Mach3/4. Plugins always behind the software, and missing features/functionality.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
- ger21
- Posts: 2714
- Joined: Sat Sep 03, 2016 2:17 am
Re: Pokeys57cnc
by chavadj » Thu May 10, 2018 2:39 pm
Thanks for your respond.... i will try Uccnc motion controllers
- chavadj
- Posts: 2
- Joined: Thu May 10, 2018 1:16 am
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 9 guests