Backlight the part of the path selected in the codeview box.

[shad]

It's will be great to backlight the part of the path in the Toolpathview corresponding to the selected gcode line in the codeview box. It's works now when program RUN, but will be very useful in the IDLE mode (for example when operator want to select any code line and scroll codeview box).
Thank you!

[Derek]

I second this. It's very helpful with larger files to get you close to the right line number if you are doing a "run from here"

[ger21]

+1

[Robertspark]

+1 too

[beefy]

Oooh yeah baby, count me in for that one too.

I use that with Mach3 when doing a mid cut restart with plasma.

Keith.

[cncdrive]

OK guys, I'll implement this soon.