Hi all,
I am Michael, based in Germany, just starting with a UC300 and UCCNC.
Up to now I used the Estlcam software for my CNC. Estlcam and Ardunio are easy to use, running well in most cased but has the limitation of just 3 Axis and a non perfect g-code interpreter.
Therefore I decided to upgrade to UCCNC where I just built up the hardware, which is at the moment not connected to the CNC machine. Anyhow I miss some featured in UCCNC, which are available in Estlcam and very comfortable: Zeroing, touching and edge finding of the workpiece.
A) Automatically Edge finding with touch plate & angular correction: https://www.youtube.com/watch?v=bhZdbgM6S70
B) Touching of edges and corners, and circles:
https://www.youtube.com/watch?v=aT_9LtDPnKw
C) Surface touching (shuld be available as plug in.)
https://www.youtube.com/watch?v=ApBfHW7AhsM
All the things are running very smooth and are used every time to zero the workpiece.
Are these features are also available within UCCNC? Which plug ins you can recommend? (I am no programmer…)
Thanks for helping here.
Best regards,
Michael