Configuration Tab crashes UCCNC

If you have a question about the software please ask it here.

Re: Configuration Tab crashes UCCNC

Postby Robertspark » Sun Aug 13, 2017 8:03 am

How much more ram are you getting as I believe that 32 bit operating systems can only use (address) up to 4gb, and that processor can use up to 8gb plus ram is relatively cheap for older computers.

Good to hear you got it sorted
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: Configuration Tab crashes UCCNC

Postby ger21 » Sun Aug 13, 2017 10:54 am

If all he's running is UCCNC on a 32bit OS, there's no need to change the OS to use more than 4Gb of RAM.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2714
Joined: Sat Sep 03, 2016 2:17 am

Re: Configuration Tab crashes UCCNC

Postby Robertspark » Sun Aug 13, 2017 12:33 pm

True, but I don't know how much ram he bought.

Also don't know how big gcode files he wishes to run.
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: Configuration Tab crashes UCCNC

Postby Gary Campbell » Mon Aug 14, 2017 2:28 am

Guys...
I ordered a few 2gb sticks as I have more of these mobo's. If I am correct Win7-32 will only recognize (manage) a max of 3gb. I will load 2 stick (4gb) on this one to test if it makes a difference. The 2gb sticks were only $17. Makes these a real bargain if they work as they will be under $145 with case, 4gb ram, 60gb SSD. When I first bought them a few years back only options were 1gb, but the latest QVL has been upgraded to some inexpensive options.
Thanks again for the advice,
GC
Gary Campbell
CNC Technology & Training
Control & ATC Retrofits
gcnc411(at)gmail.com
https://www.youtube.com/user/Islaww1/videos
Gary Campbell
 
Posts: 56
Joined: Thu Nov 24, 2016 8:25 pm

Previous

Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 32 guests