ATC - new approach

Post anything you want to discuss with others about the software.

Re: ATC - new approach

Postby sebba » Sun Jan 05, 2025 10:43 am

I cannot tell you about AXBBE but should work exactly like for UB1
give it a try and let me know if you encounter any issues
- YQWQ
User avatar
sebba
 
Posts: 82
Joined: Mon Dec 21, 2020 9:56 am
Location: Bucharest, ROMANIA

Re: ATC - new approach

Postby cncdrive » Mon Jan 06, 2025 5:26 pm

That is how you doing it, just copy the code to the sections for your motion controller using a text editor like notepad.exe.
However some LEDs will be likely not right then especially on the diagnostics screen, because for the example the UC100 has different I/Os then that UC300ETH with the UB1.
cncdrive
Site Admin
 
Posts: 5020
Joined: Tue Aug 12, 2014 11:17 pm

Re: ATC - new approach

Postby sebba » Wed Jan 08, 2025 12:22 am

yes, I did that, and also I tried to keep the original AXBBE lines in place, not to alter the whole config
- YQWQ
User avatar
sebba
 
Posts: 82
Joined: Mon Dec 21, 2020 9:56 am
Location: Bucharest, ROMANIA

Re: ATC - new approach

Postby Delco » Sat Feb 15, 2025 12:17 pm

Nice work
Delco
 
Posts: 381
Joined: Tue Apr 02, 2019 4:23 am

Re: ATC - new approach

Postby sebba » Sat Feb 15, 2025 2:20 pm

Thank you,
Unfortunately, no time for further developing. CNC activity is very reduced now, so other projects came first.
If someone is interested to continue this work, contributors are welcome!
- YQWQ
User avatar
sebba
 
Posts: 82
Joined: Mon Dec 21, 2020 9:56 am
Location: Bucharest, ROMANIA

Previous

Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 16 guests