Buona sera. Uso una AXBB-E,stavo eseguendo le impostazioni per il probe e dopo alcuni tentativi di verifica il led del probe ha iniziato a lampeggiare irregolarmente. Ovviamente ho provato a cambiare pin nell’AXBB ma niente da fare ho provato anche a cancellare il profilo di UCCNC e crearne un’altro sempre con lo stesso problema.
Allego il link del video. [youtube] https://youtu.be/sgcCDPrd1nw?si=r87_lpMxUTa89Npt[/youtube]
Led probe lampeggio irregolare.
3 posts
• Page 1 of 1
Led probe lampeggio irregolare.
by antonfat » Mon Apr 01, 2024 7:47 pm
- antonfat
- Posts: 11
- Joined: Mon Mar 04, 2024 6:08 am
Re: Led probe lampeggio irregolare.
by ger21 » Tue Apr 02, 2024 12:39 am
In English:
Good evening. I use an AXBB-E, I was making the settings for the probe and after some verification attempts the probe LED started flashing irregularly. Obviously I tried to change pins in the AXBB but to no avail, I also tried to delete the UCCNC profile and create another one with the same problem.
Good evening. I use an AXBB-E, I was making the settings for the probe and after some verification attempts the probe LED started flashing irregularly. Obviously I tried to change pins in the AXBB but to no avail, I also tried to delete the UCCNC profile and create another one with the same problem.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
- ger21
- Posts: 2714
- Joined: Sat Sep 03, 2016 2:17 am
Re: Led probe lampeggio irregolare.
by antonfat » Tue Apr 02, 2024 4:33 am
problem solved. after several checks I found a problem with the probe cable.
- antonfat
- Posts: 11
- Joined: Mon Mar 04, 2024 6:08 am
3 posts
• Page 1 of 1
Return to Ask a question from support here
Who is online
Users browsing this forum: Bing [Bot] and 29 guests