Sheetcam/UCCNC Help with setup

[Athoma94]

Hello everyone. I am fairly new to CNC setup at this level. I am very interested in being able to do this more effectively myself, but I really need to get this machine up and running. I have been emailing back and forth with CNC4pc which I purchased the control box and motors from. Everything is functioning as it should be out of the box but setting up the fine details with the floating head switch is giving me issues. I am using sheetcam to generate my gcode with the post processor sent from cnc4pc with some modifications I have successfully made (yes I have a backup). Would anyone be willing to have a phone conversation with me to help me get squared away? I would be happy to pay for someones time to explain to me the situation rather than just paying someone to set it up and not give me any lessons to the method. Maybe I am asking too much? Any help would be appreciated.

[cncdrive]

My collegue dezsoe could probably help you modifying the post processor for SheetCAM.

[Athoma94]

here is my current post for sheetcam