M6 macro for manual tool change with fixed probe

[aethersis]

This is my first post. I am super happy with how well UCCNC is running compared to Mach 3 that would literally cause the machine to stutter and slow down on curves drastically. Now I am trying to restore the functionality I had with my Mach 3 software using CNC Woodworker screenset.

I was trying to find this exact macro in the forum, but I guess I'm just really bad at this and couldn't find anything that would simply work for me.
What I need is a macro that would do the following
- Allow me to use a 3d probe to probe the workpiece
- Measure the length of the probe using a tool setter that has a fixed position
- When M6 is called, let me manually change the tool
- Once the tool is changed, it should get measured again with the tool setter, so the length offset can be calculated

I also wasn't able to simply find any macros to do basic probing of corners and height with a 3d probe. I was able to physically connected and test everything fairly quickly, since the documentation is good, but I struggle to find the macros to cover this basic functionality. I was previously using a CNC Woodworker screenset for Mach3 and wanted to get the same for UCCNC, but his website seems to be down and I don't know if it will ever be back

[ger21]

The link in my signature should be working, I fixed it last week.

[aethersis]

That fixes it for me! I purchased the 2022 screenset and it works great. Thank you so much for the huge amount of effort you put into it. No tinkering, basic setup and things just work!

[Carboncnc]

The link in my signature should be working, I fixed it last week.

Is there a way to have the normal screenset instead of your screenset ? I like the original better, but I want the probing macros to be like you have them.