Saving probe settings between sessions

[bazzer]

Hi All

Is it possible to save the probe settings between sessions. Stuff like slow and fast probe speed etc.

I have to set them every time I re-start UCCNC.

Thanks

Barry

[dezsoe]

If you have to set them every time then you use an old version of UCCNC (older than 1.2114) and you switch profiles. Do not do this: start UCCNC with the profile that you want to use. See: how to create shortcut.

[bazzer]

You are correct, I start uccnc and the switch it to my profile for my machine. I will start up using the profile I want to use and see what that does.

Thanks !!!