About CNC Software Development

[dezsoe]

The following samle will show you 31 if nothing is connected to the UC100:

Code: Select all

long inputsnow = 0;
UC100.GetInput(ref inputsnow);
Console.WriteLine(inputsnow.ToString());


The inputs are pulled high, so the lowest 5 bits will show you the input states.

[dezsoe]

I created a simple project in C# to find and connect controllers then home or move X axis. The pins are fixed in the code, you'll have to change them. I tested with it with UC100 and UC400ETH. (The UC100 in the name of the project stands for the UC100 class, not the physical device.)

Project zip download

[Battwell]

download link doesnt seem to work? deszoe

[dezsoe]

I've just checked and it works.

[Battwell]

link worked if i copied it. wouldnt work from click on it.