Setup_1.2113.exe - Downloads as a non-executable text file

Post anything you want to discuss with others about the software.

Setup_1.2113.exe - Downloads as a non-executable text file

Postby TheNigerian » Tue Aug 23, 2022 1:04 pm

Hello everyone.

I am trying to download and re-install the uccnc application from their website without success.

It downloads as a setup_1.2113.exe - a text file with an "exe" extension that Notepad opens.

And this only happens on my W10 DELL M68000 - from whence the original application was un-installed to allow me start all over.

I have it installed on a removable hard disk that I removed from another computer, but I am just curious about this downloading challenge. Is it something anyone else has experienced and perhaps solved?

UCCNC_Image.png
TheNigerian
 
Posts: 28
Joined: Sun Sep 27, 2020 2:30 pm
Location: Nigeria.

Re: Setup_1.2113.exe - Downloads as a non-executable text fi

Postby ger21 » Tue Aug 23, 2022 1:36 pm

Try renaming the file and removing the .txt extension.
This is an issue with your browser, possibly security settings?
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2714
Joined: Sat Sep 03, 2016 2:17 am

Re: Setup_1.2113.exe - Downloads as a non-executable text fi

Postby cncdrive » Tue Aug 23, 2022 6:58 pm

Maybe try a different web browser? Does that work?
Also you can try to rename the file extension from .txt to .exe to see if it runs?
cncdrive
Site Admin
 
Posts: 4887
Joined: Tue Aug 12, 2014 11:17 pm

Re: Setup_1.2113.exe - Downloads as a non-executable text fi

Postby TheNigerian » Thu Aug 25, 2022 4:13 pm

ger21 wrote:Try renaming the file and removing the .txt extension.
This is an issue with your browser, possibly security settings?


Thank you very much; using a different browser - as you suggested - was all it took to download he app.
TheNigerian
 
Posts: 28
Joined: Sun Sep 27, 2020 2:30 pm
Location: Nigeria.

Re: Setup_1.2113.exe - Downloads as a non-executable text fi

Postby TheNigerian » Thu Aug 25, 2022 4:13 pm

cncdrive wrote:Maybe try a different web browser? Does that work?
Also you can try to rename the file extension from .txt to .exe to see if it runs?


Thank you very much; using a different browser - as you suggested - was all it took to download he app.
TheNigerian
 
Posts: 28
Joined: Sun Sep 27, 2020 2:30 pm
Location: Nigeria.


Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 30 guests