Separate override for Rapid moves

[eMTea]

Hi!

I have a machine that is capable of very high rapids (for its size of machine), and would very much love to have separate override for rapids and feed.

Based on a google search, others have also wanted this, but I dont know how many users who miss it.

Is it possible to implement such a feature? And a ticked box for those who still want to use it as combined?

[cncdrive]

Yes, we have this planned, so will be implemented, likely in the next next relase.

[eMTea]

Oh shit! I already love you, where would this end

Thanks for your quick reply, and positive answer for my request

[Norx]

Yes, we have this planned, so will be implemented, likely in the next next relase.

Is this implemented, - or maybee a different case?
I belive I am in the same boat after changing to servo motors. G0 moves are faster than I want for several tasks. (example running some of the probe jobs that uses G0 or tool change) With the 3D probe in the spindle I had quite a few close calls with some wrong P or C numbers in the outer probe task. Things happen so fast that I am never able to press the red button.

[Norx]

Yes, we have this planned, so will be implemented, likely in the next next relase.

Is this released? I am in a similar boat after changing to servos on my cnc mill.
Probing actions (g0 moves) are way to fast for my liking, and I don't belive I will ever react fast enough to reach the red button in time if some of mye numbers entered for outer probing etc. is to small/bigg. So I end up in changing axis velocity before probing and back then starting a cutting job.
Maybee there is a better way that I have not thought about?

[Conta]

I can't find this function, I also searched in version 1.2117 test.
It is very important for me to separate rapid to feed. (in mach3 it works) I wait in uccnc

[cncdrive]

There is no such function in UCCNC and there is no such function in Mach3.

[Carboncnc]

Yes, we have this planned, so will be implemented, likely in the next next relase.

Is this implemented, - or maybee a different case?
I belive I am in the same boat after changing to servo motors. G0 moves are faster than I want for several tasks. (example running some of the probe jobs that uses G0 or tool change) With the 3D probe in the spindle I had quite a few close calls with some wrong P or C numbers in the outer probe task. Things happen so fast that I am never able to press the red button.

But in the probing setup you just set the speed that you want it to use when probing, easy as that.

[Conta]

The functions on mach3 are
Oem code 287 = toggle override of rapid feeds
oem code 223 = Rapid override

enabling 287 you can separate feed to rapid
and with 223 you can use slider

[cncdrive]

Ohh, I did not know it is possible in Mach3, good to know.
We have this planned to be implemented into UCCNC, but currently it is not possible.