Z axis runs negative

[Rudi Aerts]

Hi I can't get my cnc to work properly. When I run the G code configured in fusion 360 for UCCNC, the Z axis will run in a negative way. Instead to bore down it will go first down then bore upward. in attachment my setup and the Gcode.

[charliem]

If you jog the z axis does all work as expected?

[Rudi Aerts]

If you jog the z axis does all work as expected?

It is solved, I needed to invert the activ low from the direction signal. But thanks for the resonse. Do you know if I am able to plugin a IMach P4 S pendant.

[dezsoe]

If it is the VistaCNC P4-S then you can download its plugin for UCCNC.