Has anyone used a raspberry pi using a universal gcode sender with a uc400eth?
As the raspberry pi is cheaper than a new replacement laptop?
Uc400eth
4 posts
• Page 1 of 1
Uc400eth
by stuartblock1 » Mon Jun 06, 2022 9:42 am
- stuartblock1
- Posts: 1
- Joined: Mon Jun 06, 2022 9:39 am
Re: Uc400eth
by ger21 » Mon Jun 06, 2022 11:59 am
The UC400ETH will only work with UCCNC or Mach3/4.
You might want to consider a mini PC. They are pretty cheap.
You might want to consider a mini PC. They are pretty cheap.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
- ger21
- Posts: 2714
- Joined: Sat Sep 03, 2016 2:17 am
Re: Uc400eth
by cncdrive » Mon Jun 06, 2022 4:00 pm
However the Raspberry PI 4 is powerful enough to run the UCCNC it cannot run it because it does not have an OpenGL graphics driver for Windows. 
You can get a mini PC or Windows NUC for not much more expensive as a Raspberry PI 4.
You can get a mini PC or Windows NUC for not much more expensive as a Raspberry PI 4.
- cncdrive
- Site Admin
- Posts: 4887
- Joined: Tue Aug 12, 2014 11:17 pm
Re: Uc400eth
by Dazp1976 » Mon Jun 06, 2022 10:21 pm
stuartblock1 wrote:Has anyone used a raspberry pi using a universal gcode sender with a uc400eth?
As the raspberry pi is cheaper than a new replacement laptop?
A decent laptop isn't too much if you look around.
I got a nice 15.6", HP, i5, 8GB ram, 256 ssd + padded bag for £110 gbp. UCCNC and my machine run great.
- Dazp1976
- Posts: 162
- Joined: Wed Mar 16, 2022 12:57 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 8 guests