WHB04B-4 Pendant Plugin

[Archy]

Hi, Is the 6 axis xhc-whb04b-6 compatible? Ready to buy one for my axbbe. And do all buttons work?

[cncdrive]

Buy a UCR201, it is 6 axis compatible and is manufactured by us. http://cncdrive.com/downloads/UCR201_manual.pdf

[Mr.Hotwire]

Hello!
For those who want to test out the WHB04B-4 pendant plugin.
Please let me know if there is a bug's.

Not sure if this has been brought up before.

With the pendant connected, I cannot change the movement ratio via the screenset.

I can click on the + and - all I want, It scrolls up and down just fine, but then reverts BACK to the setting set on the rotary dial on the pendant.

[Fanmain6]

Hello everyone!
I am in a terrible trouble: I've purchased a 'LHB04-4 ' controller instead of WHB04-04. Is there any chance to use it with UCCNC? I have UC300-5441. Does a plugin exist for it somewhere? Or any other suggestion?
Thank You for the help! George.

[Daywalker]

Hello everyone!
I am in a terrible trouble: I've purchased a 'LHB04-4 ' controller instead of WHB04-04. Is there any chance to use it with UCCNC? I have UC300-5441. Does a plugin exist for it somewhere? Or any other suggestion?
Thank You for the help! George.

Same here, there are no way to Use the Cable Version from the Hand Wheel ???

[Daywalker]

Hello everyone!
I am in a terrible trouble: I've purchased a 'LHB04-4 ' controller instead of WHB04-04. Is there any chance to use it with UCCNC? I have UC300-5441. Does a plugin exist for it somewhere? Or any other suggestion?
Thank You for the help! George.

Ok, the Cable Version Works, but you need need to Activate MPG Cont. or Single or Multi in the "Pop-Up" Menü.

Is there a way to Stay this Activated ?

[DavoH]

Hi all,
I have the USB cable version of this pendant (LHB04B-4 I believe).
I downloaded and installed the DLL (kindly supplied by Shad on Aug 10th 2021) and found that most things work - after I've enabled it via the pop-out window for MPG thingy.
However there are no macros for it, pressing those buttons doesn't give any results.
Using the Functions button all functions work fine!
If we could get some macros working for it I'd be a very happy camper.
However, I know nothing about programming DLL's or macros or anything like them, so can anyone spend a bit of time to help out please?
There are probably lots of these cabled pendants that could be used by others too, I used mine heaps with Mach3 and it's great.
My UCCNC software is version 1.2113.
Many thanks,
Davo.

[valhallaCNC]

I just ran across this thread the pendant looks interesting. There is not a lot of currant activity on this thread. Is this plugin finished now and fully functional ? Are there any outstanding issues ? What is the latest date on the plugin? Thanks

[valhallaCNC]

WOW...This must be so good people are speechless...........

[shad]

Hi all,
I have the USB cable version of this pendant (LHB04B-4 I believe).
I downloaded and installed the DLL (kindly supplied by Shad on Aug 10th 2021) and found that most things work - after I've enabled it via the pop-out window for MPG thingy.
However there are no macros for it, pressing those buttons doesn't give any results.
Using the Functions button all functions work fine!
If we could get some macros working for it I'd be a very happy camper.
However, I know nothing about programming DLL's or macros or anything like them, so can anyone spend a bit of time to help out please?
There are probably lots of these cabled pendants that could be used by others too, I used mine heaps with Mach3 and it's great.
My UCCNC software is version 1.2113.
Many thanks,
Davo.

Hello Davo!
Can you explain about "no macros for it"?
May be you have to assign some macro for macro buttons in the plugin settings? The plugin settings window will open after the left mouse click on the remote control icon in the Windows taskbar.
It is possible to assign a macro to each button.