2017 Screenset beta testers needed

[ger21]

Finally, the replacement for the 2017 screenset is nearing completion. Since I don't have an actual machine at the moment, I need some beta testers. current 2017 screenset users only. I'll have the auto zero finished tonight, then need to make an installer and some basic instructions. Should have something by Saturday. There's currently no probing, but I have everything else working. I'm currently running with an AXBB-E on my desk, and testing with 1.2115.
Send me an email if you want to test it out.
Tell me what controller you are using, as I want to have it tested with a variety of controllers.

[cncdrive]

Gerry, you can send it to "dezsoe" to our support email to support@cncdrive.com if you would like us to test it.

[ger21]

I sent it to the gmail email he sent me the other day.

[jazzcnc]

Hi Gerry, Longtime no speak I finally switched from the dark side...Lol

We will test it for you we have AXBB-E and UC300eth test machines we can stick it on.
I'll email you or if still got mine get in touch.

Dean

[rswilliams13]

I purchased your mach 3 screen years ago, and loved it. Been waiting for the new screen since my switch to uccnc. I have a laguna smartshop 4x8 I gutted and installed a cnc4pc c94 board/uc300eth controller in. Its setup with a fixed probe (with dust blower), mist coolant and touch probe. I am definitely looking forward to your new screenset. Id be happy to test if it helps! rswilliams13@gmail.com