USB Monitor

[valhallaCNC]

Have you done any testing with Displaylink software for using a USB monitor ? I have been trying to use a USB monitor as my primary display. UCCNC loads and displays properly. The problem I'm having is with Modbus master I get a communication error occasionally with my VFD and locks up UCCNC. I don't see any memory or CPU issues when I monitor them. If I use VGA monitor this never happens. If this is a problem using a USB monitor I will move on to a VGA . Any help would be great Thanks

[valhallaCNC]

I did some more testing. I have UCCNC 1.2113 installed on win 10 pro. OS 190422.685, ver 20H2.
I'm using vga monitor for testing
Using USB camera. I have been using the webcam plugin Ver 1.0002
This is now the only USB device I'm Using
My E-stop is on Pin 1 Port 2, when ever I trigger the E-stop I get a USB disconnect from windows ( The icon pops up and I get the disconnect sound ) this always happens
Alot of the times the webcam will freeze.
Any ideas on what else I can check or Idea of whats going on ?
Thanks

[valhallaCNC]

If I disable the webcam plugin ver 1.0002 , the problem goes away. I have not been able to get it to lock once the plugin is disabled and UCCNC is restarted. When I enable it and restart I can recreate the problem. So for me I will just leave it disabled, and use the built it cam viewer. It seems with my system that was the problem.