forum.cncdrive.com

UCCNC machine control software support forum

Skip to content

Milling threads with my gantry

If you milled something cool and you want to show it to others post it here.
Post a reply

Milling threads with my gantry

Postby CADdy » Tue Nov 09, 2021 3:23 pm

Hi all,

I've wanted to do this for a long time - milling threads with my gantry. After I found a "cheap" milling cutter, I gave it a try. It was fun I must say :-)
https://youtu.be/dSjNVXApfuU

Peter
CADdy
 
Posts: 148
Joined: Sun Sep 17, 2017 2:26 pm
Top

Re: Milling threads with my gantry

Postby A_Camera » Thu Nov 11, 2021 1:17 pm

Interesting. Do you have a link to the cutter you found?
A_Camera
 
Posts: 639
Joined: Tue Sep 20, 2016 11:37 am
Top

Re: Milling threads with my gantry

Postby CADdy » Fri Nov 12, 2021 8:45 pm

A_Camera wrote:Interesting. Do you have a link to the cutter you found?


yes, it's from AliExpress:

https://de.aliexpress.com/item/10050022 ... qrLk7&mp=1

Peter
CADdy
 
Posts: 148
Joined: Sun Sep 17, 2017 2:26 pm
Top
Post a reply

Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 3 guests

Powered by phpBB® Forum Software © phpBB Group
cron