New here - have the XYZ steppers wired and operating. My question is on the AXBB-E Port 2 inputs for limits.
In UCCNC Axis setup it asks for PIN Number for Limit + and -, and Home Pin.
On the AXBB-E I see I1+ and i1- on up to i6
What are the pin numbers for these?
Thanks
Michael
AXBB-E PIN Number question
3 posts
• Page 1 of 1
AXBB-E PIN Number question
by michaelbrown » Mon Nov 08, 2021 4:47 pm
- michaelbrown
- Posts: 1
- Joined: Mon Nov 08, 2021 4:43 pm
Re: AXBB-E PIN Number question
by cncdrive » Tue Nov 09, 2021 2:44 pm
It depends on to which input pin numbers you connected your limit and home switches, you set those numbers according to your connections.
- cncdrive
- Site Admin
- Posts: 4887
- Joined: Tue Aug 12, 2014 11:17 pm
Re: AXBB-E PIN Number question
by ger21 » Tue Nov 09, 2021 6:42 pm
On the AXBB-E I see I1+ and i1- on up to i6
What are the pin numbers for these?
1-6
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
- ger21
- Posts: 2714
- Joined: Sat Sep 03, 2016 2:17 am
3 posts
• Page 1 of 1
Return to Ask a question from support here
Who is online
Users browsing this forum: No registered users and 35 guests