CAM doesn't want to creat G-code

[fdeporte]

Hi,

I have tried to create G-Code several times by means of CAM tab and I have never succeed.
The following video show the bug when I am trying to make a simple G-code from Fusion 360 dxf file:

https://www.loom.com/share/9e73f7e7552b4aecbf37ac7a6e29ff11

Do you know what doesn't work ?

Thanks.

Fred

[cncdrive]

The CAM part of the UCCNC is very limited especially compared to dedicated CAM softwares like Aspire, Fusion 360 etc.
It's limitations are listed in the UCCAM's users manual, you can find it in the UCCNC installation in the /Documentation folder.
So, in general my advice is to use a dedicated CAM software and use the UCCNC for CNC control.