Need help, something blown up :(

[cseyler]

I tried to connected an old BOB to the port 3 of my UC300ETH. Normally, there is 2 power ports (5VDC for the buffers and a VDD for the opto power. So I connected the 5VDC output of my UCBB to the 5VDC of the 5VDC of th eBOBO and the 24VDC to the VDD.
A capacitor has blown up

[img]
https://lh3.googleusercontent.com/4SZw7 ... authuser=0
[/img]

Could you tell me the value of the capacitor (I will try to replace it) and the value of one just aside (seemed not in a good shape neither)

[A_Camera]

Picture not embedded the right way, so it is not shown.

[cseyler]

Here is the picture

[A_Camera]

Perhaps it's clear for everyone else except for me, but I don't know what this is. It certainly does not look like the UC300ETH.

[Dawid92]

Here's a pic, it's 10v 220uF capacitor

[ger21]

Perhaps it's clear for everyone else except for me, but I don't know what this is. It certainly does not look like the UC300ETH.

I think it's a UCBB.