P1 and P2 parkpositions

[bhdavis]

When I press the P1 and P2 park buttons on the main screen they both will bring up the axis calibration window. I have P1 for button 200 and P2 set for button 201.

I've attached screen shots of the Macros, the button settings and the resulting axis calibration window that pops up.

The machine does not travel to the park position.

Also I've created buttons and macros using 193 and 194 and copy/pasted the M200 text into those. Same thing happened.

If I type M200 or M201 into the MDI space the park feature works as it should.

In DEMO mode P1 yields an error message saying there are errors in the code but the axis configuration window does not come up.
In DEMO mode P2 works.

BH Davis

[ger21]

See the document "Buttons by Number" in UCCNC\Documentation

Park 1 is button number 193, and Park 2 is button 194.

200 and 201 are axis calibration.

[bhdavis]

That was an error. Done some more testing and both P1 and P2 work in DEMO mode as long as I // out the Z-axis lines. But they still bring up the Z-axis calibration window when running the router.
BH

[bhdavis]

See the document "Buttons by Number" in UCCNC\Documentation

Park 1 is button number 193, and Park 2 is button 194.

200 and 201 are axis calibration.

Gerry,

Ahhh........... I see my confusion. It's BUTTON 193 but it's running MACRO 200. Somewhere along the line I got the idea that the button number ALWAYS matched the macro number. That obviously is not the case !!

Thanks,
Bernie