incorrect G41/42

[dezsoe]

Could you please post the g-code of this test?

[hmnijp]

Could you please post the g-code of this test?

here are these files

comp tests.zip

(82.24 KiB) Downloaded 556 times

[dezsoe]

Sorry, I fogot to write thank you!

[cncdrive]

I just fixed this problem (except when starting with G19G3 arc, that is currently not handled by UCCNC, I mean parts in other than in G17 with compensation, will try to implement that later).

[19Janusz53]

I have problem with G42 in loop.The view is OK, but the program only executes the first loop (Z = -2) and it goes around forever at this height.
The second problem is the messages that I don't understand and don't know how to remove.
I would like to add that without the G42 function, the whole thing works very well.