UC300 USB

If you have a question about the software please ask it here.

UC300 USB

Postby needleworks » Mon Jan 02, 2017 9:06 am

HI guys, I just downloaded the demo software but when I try to install it doesn't give me an option for the UC300 USB board, can you suggest which option I should choose?
needleworks
 
Posts: 39
Joined: Mon Jan 02, 2017 9:03 am

Re: UC300 USB

Postby cncdrive » Mon Jan 02, 2017 12:22 pm

Versions 1.1 and 1.2 supports the UC300 USB board.
I advice you to install the latest official release 1.2029 which you can download from our website: http://www.cncdrive.com/UCCNC.html
cncdrive
Site Admin
 
Posts: 4887
Joined: Tue Aug 12, 2014 11:17 pm

Re: UC300 USB

Postby ger21 » Mon Jan 02, 2017 1:08 pm

When you start UCCNC, the 2nd-7th options are for the UC300USB.
Demo_UC300_5LPT through Demo_UC300_Low
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2714
Joined: Sat Sep 03, 2016 2:17 am

Re: UC300 USB

Postby needleworks » Thu Jan 05, 2017 4:11 pm

Thanks guys, managed to get it installed OK
needleworks
 
Posts: 39
Joined: Mon Jan 02, 2017 9:03 am


Return to Ask a question from support here

Who is online

Users browsing this forum: thegreatwaldo and 24 guests