Fusion360 Post processor with probing functions

[Delco]

Does anyone have a working post processor to use the fusion360 probing functions ?

I have found this website that has a mach3 post processor but it doesnt work with uccnc.
http://www.mlmsolutions.biz/fusion_post ... robing.php

[spinelli]

This is on my wishlist too. I use a Drewtronics probe and would love to automate the probing process.

[cncdrive]

There is a nice probing screen in the UCCNC development version, you can use that.
Or you could send an email to Autodesk, ask them to make their post processor compatible.
I'm sure they will if many of you guys will ask them.

[CL_MotoTech]

Honest question about this, I have never used CAM to operate the probing operations, what is the benefit of doing this in CAM?

[Delco]

Can be used to check you have machined to the correct dimension , cycles to check for tool breakage , when finding the centre of a part distances to travel are set in cam not manually .