forum.cncdrive.com

by **laki** » Fri Jun 19, 2020 9:29 pm

Today I got a UCR201 wireless jog pendant and
i need a little help with installation.
UCCNC (ver 2113) reports an error when I enable the UCR201 plugin.

Code: Select all: See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.OverflowException: Arithmetic operation resulted in an overflow. at USBClassLibrary.USBClass.GetUSBDevice(UInt32 VID, UInt32 PID, List`1& ListOfDP, Boolean GetCOMPort, Nullable`1 MI) at Plugins.PluginForm..ctor(UCCNCplugin Pluginmain) at Plugins.UCCNCplugin.Init_event(Entry UC) ************** Loaded Assemblies ************** mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.8.4180.0 built by: NET48REL1LAST_B CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll ---------------------------------------- UCCNC Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/UCCNC.exe ---------------------------------------- System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.8.4150.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 4.0.0.0 Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.8.3752.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- OpenTK Assembly Version: 1.1.0.0 Win32 Version: 1.1.1664.6217 CodeBase: file:///C:/UCCNC/2113/UCCNC/OpenTK.DLL ---------------------------------------- System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.8.3752.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.8.4180.0 built by: NET48REL1LAST_B CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll ---------------------------------------- System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.8.3752.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- 銺翖됁꼰ꏺ趥蝠⌵ Assembly Version: 0.0.65535.65535 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/UCCNC.exe ---------------------------------------- OpenTK.GLControl Assembly Version: 1.1.0.0 Win32 Version: 1.1.1664.6217 CodeBase: file:///C:/UCCNC/2113/UCCNC/OpenTK.GLControl.DLL ---------------------------------------- OpenTK.Compatibility Assembly Version: 1.1.0.0 Win32 Version: 1.1.1664.6217 CodeBase: file:///C:/UCCNC/2113/UCCNC/OpenTK.Compatibility.DLL ---------------------------------------- ILCalc Assembly Version: 0.9.7.5 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/UCCNC.exe ---------------------------------------- 2fdsxsm2 Assembly Version: 0.0.0.0 Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- AForge.Video.DirectShow Assembly Version: 2.2.5.0 Win32 Version: 2.2.5.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/AForge.Video.DirectShow.DLL ---------------------------------------- Microsoft.CSharp Assembly Version: 4.0.0.0 Win32 Version: 4.8.3752.0 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.CSharp/v4.0_4.0.0.0__b03f5f7f11d50a3a/Microsoft.CSharp.dll ---------------------------------------- System.Dynamic Assembly Version: 4.0.0.0 Win32 Version: 4.8.3752.0 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Dynamic/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Dynamic.dll ---------------------------------------- Anonymously Hosted DynamicMethods Assembly Assembly Version: 0.0.0.0 Win32 Version: 4.8.4180.0 built by: NET48REL1LAST_B CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_64/mscorlib/v4.0_4.0.0.0__b77a5c561934e089/mscorlib.dll ---------------------------------------- ecaom50w Assembly Version: 0.0.0.0 Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- bjvvxtt2 Assembly Version: 0.0.0.0 Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- 0tarfuim Assembly Version: 0.0.0.0 Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- Plugininterface Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugininterface.DLL ---------------------------------------- AutoBackupProfile Assembly Version: 1.1.0.0 Win32 Version: 1.1.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/AutoBackupProfile.dll ---------------------------------------- AutoLevelerCA Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/AutoLevelerCA.dll ---------------------------------------- C76 Fault Reporting Assembly Version: 1.1.0.0 Win32 Version: 1.1.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/C76%20Fault%20Reporting.dll ---------------------------------------- Console Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Console.dll ---------------------------------------- Debugger Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Debugger.dll ---------------------------------------- Diagnostics Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Diagnostics.dll ---------------------------------------- FaultSignals Assembly Version: 1.2.0.0 Win32 Version: 1.2.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/FaultSignals.dll ---------------------------------------- HYPLUGIN Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/HYPLUGIN.dll ---------------------------------------- Laserengrave Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Laserengrave.dll ---------------------------------------- Lubricator Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Lubricator.dll ---------------------------------------- Modbusmaster Assembly Version: 1.5.0.0 Win32 Version: 1.5.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Modbusmaster.dll ---------------------------------------- Pinout Assembly Version: 2.7.1.0 Win32 Version: 2.7.1.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Pinout.dll ---------------------------------------- Plugintest Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Plugintest.dll ---------------------------------------- Printer3D Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Printer3D.dll ---------------------------------------- Probing Assembly Version: 1.3.2.0 Win32 Version: 1.3.2.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Probing.dll ---------------------------------------- Profiler Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Profiler.dll ---------------------------------------- Scope Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Scope.dll ---------------------------------------- UCCAM Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/UCCAM.dll ---------------------------------------- UCCNC_OSK Assembly Version: 1.7.3.0 Win32 Version: 1.7.3.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/UCCNC_OSK.dll ---------------------------------------- UCR200Plugin Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/UCR200Plugin.dll ---------------------------------------- UCR201Plugin Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/UCR201Plugin.dll ---------------------------------------- Webcamera Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Webcamera.dll ---------------------------------------- Xbox360controller Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/Xbox360controller.dll ---------------------------------------- XHC-HB04_pendant Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/UCCNC/2113/UCCNC/Plugins/XHC-HB04_pendant.dll ---------------------------------------- Microsoft.VisualBasic Assembly Version: 10.0.0.0 Win32 Version: 14.8.3752.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.

I can't run the program after this error.
Only after editing myprofile.pro and turning off the plugin in it, I can restart the program normally.
MINI PC Intel Atom Z8350 4GB / 64GB, works on windows 10

by **laki** » Sat Jun 20, 2020 11:27 am

Update,
I managed to fix this, everything is working properly.

by **cncdrive** » Sat Jun 20, 2020 1:31 pm

What was the problem?

by **laki** » Sat Jun 20, 2020 6:08 pm

I'm honestly not sure.

I solved the problem by:
1. USB wireless transmitter, plugged directly into the pc (was plugged into a USB Hub that doesn't have its own power supply)
2. Disable all plugins that were active (Autoleveler, HY12 and probe plugin)
3. turned off a couple of macroloops that I use

After that, I normally started the UCR201 plugin and then started the other plugins and macroloop one by one.
After this, everything started to work properly.

I doubt that it is that the UCR201wireless transmitter was connected to the Usb 2.0 hub 4 port (which does not have its own power supply) to which small speakers are already connected (powered by usb) as well as the RS485 adapter. I don't think the hub had enough power to run all this.

It is also possible that there was a conflict with the HY12 plugin.
After restarting the HY12 plugin, I had to re-enter the parameters for that plugin (no parameters were saved, which is strange to me).
In any case, the problem has been solved.

Balazs, thanks for the quick response and fast delivery of the jog pendant.
I think this is a great device that will make my work much easier.

by **laki** » Sun Jun 21, 2020 8:50 pm

I have another question regarding UCR201 pendant.

I cannot attach button code 110 (Home A) to custom programmable buttons (for example F2). If I do this and press that button (F2), instead of the machine referencing the A axis, it happens that the MPG switches to OFF mode.

On my machine the A axis is rotary (I mostly use it for plasma applications) and when I tighten the workpiece into a 4-Jaw chuck, it happens that due to the tightening force I turn this axis. Because of this I have to re-reference the A axis (this axis only). It would be nice to be able to do this directly with the UCR201 pendant.

I noticed one more thing.
When you press the "M / W. Coord" button on the pendant, the LCD on the UCR201 shows MACHINE CO but on the main screen instead of WORK CO these MACHINE CO are also shown. In the new screenset2019 we already have MACHINE CO always displayed on the main screen!

forum.cncdrive.com

UCR201 unhandled exception

UCR201 unhandled exception

Re: UCR201 unhandled exception

Re: UCR201 unhandled exception

Re: UCR201 unhandled exception

Re: UCR201 unhandled exception

Who is online