default jog speed

[voyager1972]

is there a way to save the keyboard jog speed, when i start uccnc it is always at 10% ,i change it to a higher value and on a restart it is back at 10%

[cncdrive]

Yes, you can do that in the constructor macro M99998.

[Robertspark]

Add this to the M99998.txt macro within your profile

Code: Select all

AS3.Setfield(60, 913);   // change the 60 to whatever % you want
AS3.Validatefield(913);
// field 913 is shown in the Fields by number.htm within the Documentation folder as
// Jogfeedrate

[Roby]

Thank you Robertspark for the suggestion. Wondering if anybody been able to get this to work on version 2113. I added the code above to M99998.txt and the jog speed still defaults to 10%.

Thanks in advance,
Roby

[dezsoe]

Sorry, Rob made a small mistake. Here is the working version:

Code: Select all

AS3jog.Setfield(60, 913);   // change the 60 to whatever % you want
AS3jog.Validatefield(913);
// field 913 is shown in the Fields by number.htm within the Documentation folder as
// Jogfeedrate

[Robertspark]

oops... forgot it was on the jog screen..... AS3jog

[Roby]

This works a treat, thanks guys!

[The-Meerkat]

This works great. Having to bump up the jog speed every time has been bugging me. I’ve been meaning to get around to changing the 99998 macro and finally did it this morning. Awesome little fix!

[Owlwood]

Worked for me too!
This has been bugging me for months!

Thanks Gents.

[Owlwood]

This worked great for me too

Thanks for sharing!