forum.cncdrive.com

UCCNC machine control software support forum

Skip to content

ProbeIt for UCCNC

This is where you talk about Plugins. How they are made and how they work, show examples.
Post a reply

Re: ProbeIt for UCCNC

Postby Battwell » Fri Mar 06, 2020 2:04 am

I watched this today. Superb work !
Uc300eth on router and mill.
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
Battwell
 
Posts: 867
Joined: Sun Sep 25, 2016 7:39 pm
Location: South Wales. Uk
Top

Re: ProbeIt for UCCNC

Postby ThreeDJ16 » Fri Mar 06, 2020 5:04 am

Wow, very nice. Can't wait for you to release this.
ThreeDJ16
 
Posts: 164
Joined: Tue Oct 31, 2017 5:57 pm
Top

Re: ProbeIt for UCCNC

Postby eabrust » Mon Mar 09, 2020 2:42 am

Hi there guys,

I spent as much time as I could this weekend tying off as many of the loose ends of the ProbeIt plugin as I could, and working on a manual to go with the plugin. I'm ready to take a break from working on this a bit :) While I'll still call the plugin 'preliminary' and definitely incomplete, I think it is stable enough for others to try out and see how it works. As usual, I use inch units, so I hope there isn't anything that causes problem for you metric folks. If there is, let me know and I'll fix it up !

I've made the prelim version of the plugin available as a 'zip' file. It's to large to post here, so I've put it at the following linked page: http://www.craftycnc.com/probeit-for-uccnc/, with the download file here: http://www.craftycnc.com/download/598/. (fyi, The links here on the forum are the only pointers to the plugin currently).

Installation is easy:
ProbeIt_UC.dll goes into the plugins folder, and the ProbeIt folder should also get copied into plugins folder (with all its contents).

Please note, I've tried to make a reference manual (PDF) which can be accessed from a button on the 'About' tab, it also lives in the plugin\probeit folder to open it directly (and yes, the manual is a work in progress also...). I also left some sample output files in the folder as well to you can see if the DXF files it outputs are usable for you, etc.


Here is a short video on the 'surface probing' portion of the plugin. This is was incorporating a version of the 'ProbeCloud' plugin I've had available a while, and cleaning some stuff up with regards to file open/save issues. It isn't pretty, but it works. I'll save making it pretty for a new day.... and hopefully replace the 'charting' that I use for the display.


I look forward to your feedback, good and bad. Obviously, the bad feedback will do more to cause updates to the plugin than the good feed back :lol:

regards,
Eric
CraftyCNC: Plugins for UCCNC (and other neat stuff): http://www.craftycnc.com/plugins-for-uccnc/
eabrust
 
Posts: 357
Joined: Fri Sep 16, 2016 2:32 am
Location: Near Shirland IL, USA
Top

Re: ProbeIt for UCCNC

Postby markcadcam » Tue Mar 10, 2020 3:14 pm

I get this error using version 1.2113
Attachments
Error.jpg
markcadcam
 
Posts: 97
Joined: Thu Apr 13, 2017 1:52 pm
Top

Re: ProbeIt for UCCNC

Postby eabrust » Tue Mar 10, 2020 3:51 pm

markcadcam wrote:I get this error using version 1.2113


Hi Markcadcam,

Well thats a bummer... :oops:

Can you give some more info please? Did this happen as plugin loaded, or did it happen after you tried to run some routine?

thanks
Eric
CraftyCNC: Plugins for UCCNC (and other neat stuff): http://www.craftycnc.com/plugins-for-uccnc/
eabrust
 
Posts: 357
Joined: Fri Sep 16, 2016 2:32 am
Location: Near Shirland IL, USA
Top

Re: ProbeIt for UCCNC

Postby markcadcam » Tue Mar 10, 2020 3:59 pm

I enabled the plugin, restarted the program and I got that error on start up.
markcadcam
 
Posts: 97
Joined: Thu Apr 13, 2017 1:52 pm
Top

Re: ProbeIt for UCCNC

Postby eabrust » Tue Mar 10, 2020 4:53 pm

Thanks again, I will try to look at it tonight. I can't imagine there is anything between 1.2112 and 1.2113 that would matter.

Can you confirm you copied the 'probeit' folder and it's contents into the plugin directory? If you click continue, did it recover and run, or did it crash ?

And last favor I ask, could you please copy paste the text (scrolling down further to what is shown) from that exception window and either email it to me or paste here.

regards
Eric
CraftyCNC: Plugins for UCCNC (and other neat stuff): http://www.craftycnc.com/plugins-for-uccnc/
eabrust
 
Posts: 357
Joined: Fri Sep 16, 2016 2:32 am
Location: Near Shirland IL, USA
Top

Re: ProbeIt for UCCNC

Postby markcadcam » Tue Mar 10, 2020 5:12 pm

Yes, I copied all of the files to the plugin folder.

Below is all of the error messages.

I'm running.
OS Name Microsoft Windows 10 Home
Version 10.0.18363 Build 18363




See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentNullException: Array cannot be null.
at System.Reflection.RuntimeAssembly.nLoadImage(Byte[] rawAssembly, Byte[] rawSymbolStore, Evidence evidence, StackCrawlMark& stackMark, Boolean fIntrospection, Boolean fSkipIntegrityCheck, SecurityContextSource securityContextSource)
at System.Reflection.Assembly.Load(Byte[] rawAssembly)
at UCCNC.Form1.CurrentDomain_AssemblyResolve(Object sender, ResolveEventArgs args)
at System.AppDomain.OnAssemblyResolveEvent(RuntimeAssembly assembly, String assemblyFullName)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4150.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
UCCNC
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/UCCNC.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4150.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.8.3752.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
OpenTK
Assembly Version: 1.1.0.0
Win32 Version: 1.1.1664.6217
CodeBase: file:///C:/UCCNC/OpenTK.DLL
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.8.3752.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.8.4121.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.8.3752.0 built by: NET48REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
銺翖됁꼰ꏺ趥蝠⌵
Assembly Version: 0.0.65535.65535
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/UCCNC.exe
----------------------------------------
OpenTK.GLControl
Assembly Version: 1.1.0.0
Win32 Version: 1.1.1664.6217
CodeBase: file:///C:/UCCNC/OpenTK.GLControl.DLL
----------------------------------------
OpenTK.Compatibility
Assembly Version: 1.1.0.0
Win32 Version: 1.1.1664.6217
CodeBase: file:///C:/UCCNC/OpenTK.Compatibility.DLL
----------------------------------------
ILCalc
Assembly Version: 0.9.7.5
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/UCCNC.exe
----------------------------------------
r0nl5dxz
Assembly Version: 0.0.0.0
Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
AForge.Video.DirectShow
Assembly Version: 2.2.5.0
Win32 Version: 2.2.5.0
CodeBase: file:///C:/UCCNC/AForge.Video.DirectShow.DLL
----------------------------------------
Plugininterface
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugininterface.DLL
----------------------------------------
AutoBackupProfile
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/UCCNC/Plugins/AutoBackupProfile.dll
----------------------------------------
AutoLevelerCA
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/AutoLevelerCA.dll
----------------------------------------
C76 Fault Reporting
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/UCCNC/Plugins/C76%20Fault%20Reporting.dll
----------------------------------------
Console
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Console.dll
----------------------------------------
Debugger
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Debugger.dll
----------------------------------------
Diagnostics
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Diagnostics.dll
----------------------------------------
FaultSignals
Assembly Version: 1.2.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///C:/UCCNC/Plugins/FaultSignals.dll
----------------------------------------
Laserengrave
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Laserengrave.dll
----------------------------------------
Lubricator
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Lubricator.dll
----------------------------------------
Modbusmaster
Assembly Version: 1.5.0.0
Win32 Version: 1.5.0.0
CodeBase: file:///C:/UCCNC/Plugins/Modbusmaster.dll
----------------------------------------
Pinout
Assembly Version: 2.7.1.0
Win32 Version: 2.7.1.0
CodeBase: file:///C:/UCCNC/Plugins/Pinout.dll
----------------------------------------
Plugintest
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Plugintest.dll
----------------------------------------
Printer3D
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Printer3D.dll
----------------------------------------
ProbeIt_UC
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/ProbeIt_UC.dll
----------------------------------------
Probing
Assembly Version: 1.3.2.0
Win32 Version: 1.3.2.0
CodeBase: file:///C:/UCCNC/Plugins/Probing.dll
----------------------------------------
Profiler
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Profiler.dll
----------------------------------------
Scope
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Scope.dll
----------------------------------------
UCCAM
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/UCCAM.dll
----------------------------------------
UCCNC_OSK
Assembly Version: 1.7.3.0
Win32 Version: 1.7.3.0
CodeBase: file:///C:/UCCNC/Plugins/UCCNC_OSK.dll
----------------------------------------
UCR200Plugin
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/UCR200Plugin.dll
----------------------------------------
UCR201Plugin
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/UCR201Plugin.dll
----------------------------------------
Webcamera
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Webcamera.dll
----------------------------------------
Xbox360controller
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Xbox360controller.dll
----------------------------------------
XHC-HB04_pendant
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/XHC-HB04_pendant.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
markcadcam
 
Posts: 97
Joined: Thu Apr 13, 2017 1:52 pm
Top

Re: ProbeIt for UCCNC

Postby thegreatwaldo » Tue Mar 10, 2020 10:30 pm

Hi Eric

I'm getting the same kind of error as Markcadcam with ver. 2.113 and win7 I'll try it on my machine computer which probably has an older version to see if that works and get back to you.

Here's the error message win7 32bit uccnc 2.111
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentNullException: Array cannot be null.
at System.Reflection.RuntimeAssembly.nLoadImage(Byte[] rawAssembly, Byte[] rawSymbolStore, Evidence evidence, StackCrawlMark& stackMark, Boolean fIntrospection, Boolean fSkipIntegrityCheck, SecurityContextSource securityContextSource)
at System.Reflection.Assembly.Load(Byte[] rawAssembly)
at UCCNC.Form1.CurrentDomain_AssemblyResolve(Object sender, ResolveEventArgs args)
at System.AppDomain.OnAssemblyResolveEvent(RuntimeAssembly assembly, String assemblyFullName)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3416.0 built by: NET472REL1LAST_B
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
UCCNC
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/UCCNC.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3324.0 built by: NET472REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3416.0 built by: NET472REL1LAST_B
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3221.0 built by: NET472REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
OpenTK
Assembly Version: 1.1.0.0
Win32 Version: 1.1.1664.6217
CodeBase: file:///C:/UCCNC/OpenTK.DLL
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3324.0 built by: NET472REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3429.0 built by: NET472REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3221.0 built by: NET472REL1LAST_C
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
????????
Assembly Version: 0.0.65535.65535
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/UCCNC.exe
----------------------------------------
OpenTK.GLControl
Assembly Version: 1.1.0.0
Win32 Version: 1.1.1664.6217
CodeBase: file:///C:/UCCNC/OpenTK.GLControl.DLL
----------------------------------------
OpenTK.Compatibility
Assembly Version: 1.1.0.0
Win32 Version: 1.1.1664.6217
CodeBase: file:///C:/UCCNC/OpenTK.Compatibility.DLL
----------------------------------------
ILCalc
Assembly Version: 0.9.7.5
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/UCCNC.exe
----------------------------------------
zsyei5e1
Assembly Version: 0.0.0.0
Win32 Version: 4.7.3416.0 built by: NET472REL1LAST_B
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
Plugininterface
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugininterface.DLL
----------------------------------------
AutoBackupProfile
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/UCCNC/Plugins/AutoBackupProfile.dll
----------------------------------------
AutoLevelerCA
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/AutoLevelerCA.dll
----------------------------------------
Console
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Console.dll
----------------------------------------
Debugger
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Debugger.dll
----------------------------------------
Diagnostics
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Diagnostics.dll
----------------------------------------
FaultSignals
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/UCCNC/Plugins/FaultSignals.dll
----------------------------------------
Laserengrave
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Laserengrave.dll
----------------------------------------
Lubricator
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Lubricator.dll
----------------------------------------
Modbusmaster
Assembly Version: 1.2.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///C:/UCCNC/Plugins/Modbusmaster.dll
----------------------------------------
Pinout
Assembly Version: 2.5.0.0
Win32 Version: 2.5.0.0
CodeBase: file:///C:/UCCNC/Plugins/Pinout.dll
----------------------------------------
Plugintest
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Plugintest.dll
----------------------------------------
Printer3D
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Printer3D.dll
----------------------------------------
ProbeIt_UC
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/ProbeIt_UC.dll
----------------------------------------
Probing
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Probing.dll
----------------------------------------
Profiler
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Profiler.dll
----------------------------------------
Scope
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Scope.dll
----------------------------------------
UCCAM
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/UCCAM.dll
----------------------------------------
UCCNC_OSK
Assembly Version: 1.7.3.0
Win32 Version: 1.7.3.0
CodeBase: file:///C:/UCCNC/Plugins/UCCNC_OSK.dll
----------------------------------------
UCR200Plugin
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/UCR200Plugin.dll
----------------------------------------
UCR201Plugin
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/UCR201Plugin.dll
----------------------------------------
Webcamera
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Webcamera.dll
----------------------------------------
Xbox360controller
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/Xbox360controller.dll
----------------------------------------
XHC-HB04_pendant
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/UCCNC/Plugins/XHC-HB04_pendant.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.



Cheers
Andrew
Last edited by thegreatwaldo on Tue Mar 10, 2020 10:47 pm, edited 1 time in total.
thegreatwaldo
 
Posts: 177
Joined: Tue Sep 06, 2016 8:28 pm
Top

Re: ProbeIt for UCCNC

Postby thegreatwaldo » Tue Mar 10, 2020 10:46 pm

Hi Eric
It's the the Probeituc.dll file that cause the problem stopping the program from starting properly.

Cheers
Andrew
thegreatwaldo
 
Posts: 177
Joined: Tue Sep 06, 2016 8:28 pm
Top
PreviousNext
Post a reply

Return to Plugins

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB® Forum Software © phpBB Group