forum.cncdrive.com

by **loesch** » Tue Oct 15, 2019 6:24 pm

Why are some of the settings grayed out and not configurable (e.g. homing speeds). Is there some way to turn this protection off?

by **loesch** » Tue Oct 15, 2019 8:13 pm

Since my first posting, I changed the values not under setup on UCCNC, but in the profile instead. Got things working.

by **dezsoe** » Tue Oct 15, 2019 8:33 pm

The settings are only grayed out while the machine is moving or running a macro.

by **cncdrive** » Tue Oct 15, 2019 10:07 pm

You probably forgot to press the ENTER keyboard key after you input the number into the DRO. They are not disabled...

by **loesch** » Wed Oct 16, 2019 6:38 pm

Brain fart time. Was pressing <return> vs. <enter>. Makes no difference most elsewhere, but important here.

by **Robertspark** » Wed Oct 16, 2019 6:48 pm

loesch wrote:.... <return> vs. <enter>.....

I thought {carriage} return was the same as "enter"? :mrgreen:

educate me please, thanks

by **Robertspark** » Wed Oct 16, 2019 7:02 pm

https://en.wikipedia.org/wiki/Enter_key ... :Enter.png

well I learnt something... but I tested them and they work exactly the same on my UCCNC setup

by **Tweakie.CNC** » Thu Oct 17, 2019 5:59 am

Robertspark wrote:https://en.wikipedia.org/wiki/Enter_key#/media/File:Enter.png

well I learnt something... but I tested them and they work exactly the same on my UCCNC setup

by **Spuds** » Mon Oct 21, 2019 3:41 pm

loesch wrote:Brain fart time. Was pressing <return> vs. <enter>. Makes no difference most elsewhere, but important here.

.... maybe loesch was actually hitting "Backspace" instead of "Return/Enter"

forum.cncdrive.com

1.2112 settings

1.2112 settings

Re: 1.2112 settings

Re: 1.2112 settings

Re: 1.2112 settings

Re: 1.2112 settings

Re: 1.2112 settings

Re: 1.2112 settings

Re: 1.2112 settings

Re: 1.2112 settings

Who is online