Macro - M56 (as MSG) - write message to status

[dezsoe]

Here is a macro for displaying messages to status window. It shows the contents of the comment between ( and ). You can print variables with the format #nnn or #Fnnn, where nnn is the number of the variable, F stands for formatted to 4 decimals. See screenshot below:

And a test g-code to start with:

Code: Select all

#100 = 1.23
#101 = 3.45
M56 (Hello operator 1!)
(Hello operator 2!)M56
M56(Hello operator 3!)G0
M56(Var 100 = #100)
M56(Var 100 formatted = #F100, var 101 = #101)
M30


Edit: You need min. 1.2102 for this macro to work!

[BKG]

Hello, the newest version is 12049 i can not gett it working in that version ??

[ger21]

You need the development release (#3)
http://www.cncdrive.com/UCCNC.html

[beefy]

Thanks Dezsoe.

Keith.