Removing Jog panel

[TadasM]

Thank You Gents for your help. I will test the new code tomorrow morning

Another question regarding jog panel. Is it possible to make panel positioned from bottom of the screen, not from top (current jog panel dimensions are 300x400) ?

Question reg. jog panel

p.s. I finally got working jog panel buttons. It is bit different from Homing buttons for eg as they maintain the current state (not only when pressed)

0.001 step distance buttons state UP

STEP_DIST_001_UP.png (1.67 KiB) Viewed 13090 times

0.001 step distance buttons state DOWN

STEP_DIST_001_DOWN.png (2.46 KiB) Viewed 13090 times

[TadasM]

Think you need an exclamation mark before the buttonstate within the if statement

If (!buttonstate){ // ie if NOT true, then make it true,
...
}
else // if true, then make if false.

Robertspark, Gerry,

thank you, it works now

Code: Select all

bool buttonstate = AS3.Getbuttonstate(20001);

if (!buttonstate)
    {
   AS3.Switchbutton(true,20001);   
   exec.Setoutpin(2, 5);
    }
else

    {
    AS3.Switchbutton(false,20001);
    exec.Clroutpin(2, 5);
    }

[Robertspark]

Another question regarding jog panel. Is it possible to make panel positioned from bottom of the screen, not from top (current jog panel dimensions are 300x400) ?

I don't think it is possible as there are only 2 parameters associated with the jog panel (X & Y), hence no offset from 0,0 (top left hand corner co-ordinate position).

[ger21]

I had an idea, but tried it and it didn't work.
So no, it doesn't appear that you can.