UCCNC never missed a beat roughing out the dovetail with a 1/8" endmill and 3/16" dovetail cutter before plunging in with the fragile 3/8" cutter.
2011 Slide Machining
1 post
• Page 1 of 1
2011 Slide Machining
by spumco » Sun Aug 05, 2018 6:40 pm
Blind 3/8" dovetail in a stainless 2011 slide. High-anxiety cut as so much work was already done to an expensive part.
UCCNC never missed a beat roughing out the dovetail with a 1/8" endmill and 3/16" dovetail cutter before plunging in with the fragile 3/8" cutter.
UCCNC never missed a beat roughing out the dovetail with a 1/8" endmill and 3/16" dovetail cutter before plunging in with the fragile 3/8" cutter.
- spumco
- Posts: 306
- Joined: Mon Oct 03, 2016 10:10 pm
1 post
• Page 1 of 1
Return to What you've made with your machine post the pictures, videos here
Who is online
Users browsing this forum: No registered users and 9 guests