CNC control panel

[VLTechnology]

Hello.Can I get the files for this scenset?

[CFSAB]

Hi

I´m also interested in the screenset files, I just ordered a 21.5" capacitive touch monitor and found this. Would be nice to not need to start from scratch to make my own screenset

[birthdayloosen]

Wow, your control panel project looks fantastic! The 21.5" capacitive multitouch screen with Full HD resolution is a great choice for a high-quality display. It's impressive that you've integrated an Intel NUC with Core i3 (8th Gen) 8109U, 8GB of RAM, and an SSD XPG SX6000 128GB Lite PCIe into the CNC control panel for efficient performance.

The wiring setup seems well-thought-out and straightforward, with the RJ45 (LAN) cable connecting the control panel to the UC300ETH and a 14-wire control cable handling various functions. Your attention to detail, including connectors for analog inputs, MPG, emergency stop, power on, and other functions, speaks to the thoroughness of your design.

The focus on creating an intuitive software experience is commendable, and I'm excited to see how you progress with the probing and additional screens. The adjustable mounting solution for the control panel in all three directions is a thoughtful touch, providing flexibility and ease of use.

Overall, your dedication to this project is evident, and it's shaping up to be a sophisticated and user-friendly control panel. Looking forward to seeing the final result and any further updates you have to share!

[Algone]

Hi guys, I tried to contact TadasM to finish the work he started but to no avail. Now that I've got my hands on the 2019 vertical screen https://www.forum.cncdrive.com/viewtopic.php?f=9&t=4948 I decided to redo TadasM's, it will be almost identical, I based it on the video he posted. It's a lot of work but I've made good progress, if any of you are interested I'll post my version.
TadasM if you are in the area send me a private message, I would be interested in hearing your point of view.

[valhallaCNC]

When you make some headway...I would be interested. Thanks

[valhallaCNC]

Are your vertical screen sets ready to post yet ? Thanks