The National electric watch cleaner.
Posted: Fri Sep 29, 2023 7:14 amFor those who know it will be obvious that this panel is not original but it is for a sympathetic rebuild of a 1940s machine which, during its lifetime, has had considerable use and unfortunately suffered the ravages of time.
This little panel was made using a combination of rotary engraving and laser raster engraving with the same machine and what is worthy of note is that by using UCCNC I was able to obtain perfect scale and positional accuracy between the two processes which is something I was unable to achieve using Mach4.
Tweakie.
This little panel was made using a combination of rotary engraving and laser raster engraving with the same machine and what is worthy of note is that by using UCCNC I was able to obtain perfect scale and positional accuracy between the two processes which is something I was unable to achieve using Mach4.
Tweakie.