First try at an inlay- walnut into oak
Posted: Sun Feb 26, 2017 8:44 pmOnly 100mm wide
Note no gaps !
Note no gaps !
- image.jpg (17.69 KiB) Viewed 12194 times
forum.cncdrive.com
UCCNC machine control software support forum
https://forum.cncdrive.com/
First try at an inlay- walnut into oak
Page 1 of 1
Posted: Sun Feb 26, 2017 8:44 pmRe: First try at an inlay- walnut into oak
Posted: Mon Feb 27, 2017 6:12 pmWow, very nice! Are you saying you used size-on-size for the pocket vs. the piece going into it? Iv never done inlays before.
Re: First try at an inlay- walnut into oak
Posted: Tue Feb 28, 2017 1:33 amNo. There is a better way
To ensure no gaps. Cut as a vcarve
The male is cut as a negative vcarve
So both parts are tapered.
To ensure no gaps. Cut as a vcarve
The male is cut as a negative vcarve
So both parts are tapered.
Re: First try at an inlay- walnut into oak
Posted: Tue Feb 28, 2017 2:06 amJust made another one tonight. Here is a video of it before gluing together
I won't put the pic of it ... As terry doesn't like my art!
https://youtu.be/8qwxHlxPw6k
It came out perfect
I won't put the pic of it ... As terry doesn't like my art!
https://youtu.be/8qwxHlxPw6k
It came out perfect