2011 Slide Machining
Posted: Sun Aug 05, 2018 6:40 pmBlind 3/8" dovetail in a stainless 2011 slide. High-anxiety cut as so much work was already done to an expensive part.
UCCNC never missed a beat roughing out the dovetail with a 1/8" endmill and 3/16" dovetail cutter before plunging in with the fragile 3/8" cutter.
UCCNC never missed a beat roughing out the dovetail with a 1/8" endmill and 3/16" dovetail cutter before plunging in with the fragile 3/8" cutter.