3500x2200mm CNC Build with UCCNC

[dezsoe]

You can connect buttons to inputs and set them as input triggers to activate buttons like Cycle start. It is also possible to automate the startup, however I do not recommend it, because it is unsafe to start movements without user interaction.

[RRocadas]

You can connect buttons to inputs and set them as input triggers to activate buttons like Cycle start. It is also possible to automate the startup, however I do not recommend it, because it is unsafe to start movements without user interaction.

Ok thank you.
I have passed from grbl to UCCNC and it's amazing all possibilities!!!
So i can wire a button for example to a isolated input I4+ and power input 24v+ and tell in uccnc interface that Pin I4 is to cycle start?
thank you very much for the help

[dezsoe]

Yes, exactly.

[RRocadas]

Yes, exactly.

Thank you very much.

[RRocadas]

Here one of the test's at 10000mm/min

[RRocadas]

Z axis to start.

[RRocadas]

Just came back with ore time and i'm finishing z axis now.

[maycatcnc]

thank you for your help i guess i will need for this.

[RRocadas]

[ Play Quicktime file ] CNC-3500x2200-a2000mm.mp4 [ 1.81 MiB | Viewed 11631 times ]

Hi everybody
THanks to all who have been helping me.
Here are the first test of movements.

[RRocadas]

And that's it
All done and working just how i expected...