M03 Not working
Posted: Sun Jan 05, 2025 10:49 amHello,
With button the spindle works, but using M03 the spindle don't run, what can be the problem?
With button the spindle works, but using M03 the spindle don't run, what can be the problem?
forum.cncdrive.com
UCCNC machine control software support forum
https://forum.cncdrive.com/
M03 Not working
Page 1 of 1
Posted: Sun Jan 05, 2025 10:49 amRe: M03 Not working
Posted: Sun Jan 05, 2025 3:52 pmSolved, M3 Macro error.