Page 1 of 1

Analogue output on ETH 300

PostPosted: Thu Jan 02, 2025 3:10 pm
by formantjim
In the manual for the ETH 300 it shows that it has two Analogue outputs on the analogue Port with Pins 6,7,14 and 15 but does not say the polarity for the analogue output on these pins. Can anyone tell me which is positive and negative for these pins please?

Re: Analogue output on ETH 300

PostPosted: Thu Jan 02, 2025 6:29 pm
by RsX
I think the the pins are duplicated.
So Ground is negative and Analog output is positive (either 6-7 or 14-15)
dup.png

Re: Analogue output on ETH 300

PostPosted: Fri Jan 03, 2025 5:38 am
by cncdrive
Yes, the pins are simply duplicated, the same function is connected to both pins on the 2 sides of the connector as per the users manual.

Re: Analogue output on ETH 300

PostPosted: Fri Jan 03, 2025 6:13 pm
by formantjim
Wonderful guys thank you!