just thinking out loud.
to work on a board edge with a horizontal spindle.
thinking can i rotate z and y axis 90 degrees to achieve this.
or will i need to axis swap.
never used the rotate command.
rotate functin g68 to work on an edge
2 posts
• Page 1 of 1
rotate functin g68 to work on an edge
by Battwell » Fri Mar 29, 2024 9:41 am
Uc300eth on router and mill.
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
- Battwell
- Posts: 867
- Joined: Sun Sep 25, 2016 7:39 pm
- Location: South Wales. Uk
Re: rotate functin g68 to work on an edge
by Battwell » Fri Mar 29, 2024 9:53 am
ok. just read the manual.
only x and y can be rotated.
only x and y can be rotated.
Uc300eth on router and mill.
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
- Battwell
- Posts: 867
- Joined: Sun Sep 25, 2016 7:39 pm
- Location: South Wales. Uk
2 posts
• Page 1 of 1
Return to Ask a question from support here
Who is online
Users browsing this forum: Bing [Bot] and 19 guests