forum.cncdrive.com

Hi,

I'm trying to set the P1 and P2 park positions but it doesn't seem to be working.

I've changed (and saved) the coordinates in the 200 and 201 files in the macro folder for my uccnc profile.
But it doesn't seem to make any difference. When I press the p1 button it just lowers the spindle until it bottoms out
And I have reset the limits.

Any help would be great.

Thanks

If you didn't change them these macros move in machine coordinates. (G0 G53 ...)

Are you setting it to machine coordinates G53 and saving ?

Is it the correct M200 and M201 you are editing and not another profile ?