Limi-Switch/Homing Switch, ignored with manual (MPG) moves..
Posted: Wed Apr 19, 2023 10:36 amHi
on my Machine I've installed a set of inductive NPN Sensors, that are used for homing and as a Limit Switches...
It all works as it should - I can home the machine with the needed accuracy, and when the machine makes a move that exceeds the limits it issues an e-Stop...
however when I jog the machine's axises using the MPG (WHB04) I can actually "crash" it
whilst the sensors are triggered, the machine does seem to ignore it...
any help is welcome.... thanks
on my Machine I've installed a set of inductive NPN Sensors, that are used for homing and as a Limit Switches...
It all works as it should - I can home the machine with the needed accuracy, and when the machine makes a move that exceeds the limits it issues an e-Stop...
however when I jog the machine's axises using the MPG (WHB04) I can actually "crash" it
whilst the sensors are triggered, the machine does seem to ignore it...
any help is welcome.... thanks