Page 1 of 1
in the air speed
Posted:
Tue Dec 20, 2022 3:46 pmby BJB
Was wondering, could someone tell me how to slow down the "in air" speed.
I would like to slow the speed that spindle moves when it is in the air while doing a job, or is that done in the CAD/CAM software?
Thanks
Re: in the air speed
Posted:
Tue Dec 20, 2022 4:24 pmby ger21
It' the velocity setting in UCCNC for each axis.
Re: in the air speed
Posted:
Tue Dec 20, 2022 4:46 pmby BJB
Great thanks, does the velocity speed only effect the speed of the router when its in the air?
Re: in the air speed
Posted:
Tue Dec 20, 2022 5:12 pmby BJB
OK, found the velocity setting which was set at 5100. Clicked in the box and replaced 5100 with 4100. When I clicked apply settings it jumped back to 5100..... help
Thanks
Re: in the air speed
Posted:
Tue Dec 20, 2022 6:04 pmby ger21
Hit the Enter key after typing in the new speed.
The velocity is the maximum speed the axis is capable of moving, which is used for rapid (air) moves.
Re: in the air speed
Posted:
Tue Dec 20, 2022 9:08 pmby BJB
Thanks for the advice, too late to try it now. But will do tomorrow and will let you know.
Thanks again.
Re: in the air speed
Posted:
Wed Dec 21, 2022 1:38 pmby BJB
Thanks Gerry, it worked just as you said.