UCCNC Settings for Feed and Speed Override AXBB-E
Posted: Sat Aug 20, 2022 3:11 pmHi All,
I have a AXBB-E and jus bought a few 10k potentiometers for controlling the speed and feed overide.
The potentiometers are v+ v- and the sweep. The AXBB-E mentions using the 5v+ and 5v- then the sweep in the Analog Inputs. How is this configured in UCCNC. I can see the IO setup has a variable but what do you select then how is this setup in UCCNC so anti-clock turns feed or speed up/ and direction potentiometer is turned (depending what potentiometer is used).
I've got a box which I've wired up already which has e-stop, start and feed hold which works really well so jus bought a bigger box and going to transfer those buttons and add the 2 potentiometers one for feed override and one for speed override.
Thanks in anticipation of replies.
I have a AXBB-E and jus bought a few 10k potentiometers for controlling the speed and feed overide.
The potentiometers are v+ v- and the sweep. The AXBB-E mentions using the 5v+ and 5v- then the sweep in the Analog Inputs. How is this configured in UCCNC. I can see the IO setup has a variable but what do you select then how is this setup in UCCNC so anti-clock turns feed or speed up/ and direction potentiometer is turned (depending what potentiometer is used).
I've got a box which I've wired up already which has e-stop, start and feed hold which works really well so jus bought a bigger box and going to transfer those buttons and add the 2 potentiometers one for feed override and one for speed override.
Thanks in anticipation of replies.
