forum.cncdrive.com

Hi,

I want use Shapr3D on my IpadPro to draw parts using uccnc with a Stepcraft M700
When I try to open the dxf file with uccnc I get „this is not a valid acad dxf file”.
Thanks for help!

Martin from Germany

The problem is that there are many different .dxf file versions, and most software that read and write .dxf files use a specific format, and often don't follow the format 100% accurately. The end result can be a lot of incompatibility.

The only real option you have is to find another application that can open your .dxf files, and save them in a different format that UCCNC can read.

We working on upgrading the UCCAM, the next release will read most DXF versions and will also read splines and nurbs in the DXF files.