Page 1 of 1
AXBB-C Does not connect to computer
Posted:
Fri Apr 01, 2022 5:25 amby Neculai
Hi all.
I bought an AXBB-C and the computer can't get any line from it.
He does not receive mach3 or uccnc.
Computer settings are done as in the manual.
I changed the cable with a cross and it's the same thing.
The computer sends packets but receives nothing.
Anticipated thanks for the answer!
Re: AXBB-C Does not connect to computer
Posted:
Fri Apr 01, 2022 10:51 amby ger21
Post a screenshot of your network settings.
Many people misread the manual and set it up wrong.
Re: AXBB-C Does not connect to computer
Posted:
Sat Apr 02, 2022 11:27 amby Neculai
Hi all
I don't know how to take a screenshot on the topic.
The settings made are:
Ipv4 10.10.10.10
Subnet mask ipv4 255.255.255.0
DHCP abilitato No
These were the changes made as in the manual and connected with a cross cable between the computer and the card.
And yet it doesn't work.
I also bought the uccnc license, but if they don't see each other, the license can't be functional.
Thank you in advance!
Re: AXBB-C Does not connect to computer
Posted:
Sat Apr 02, 2022 11:51 amby Neculai
Hi all
Only these settings need to be made I think.
Re: AXBB-C Does not connect to computer
Posted:
Sat Apr 02, 2022 11:51 amby Neculai
Does anything else need to be done to make it work?
Re: AXBB-C Does not connect to computer
Posted:
Sat Apr 02, 2022 3:28 pmby ger21
No, that's all.
Are you getting a green light at the AXBB-E network port when the cable is plugged in?