UC300 / UCSB Combo voltage supply.
Posted: Wed Feb 16, 2022 7:02 amWhen using a UC300 and a UCSB OR UCBB breakout board is it ok to supply 24V in to the breakout board and then use the 5V out to power the UC300 ?
forum.cncdrive.com
UCCNC machine control software support forum
https://forum.cncdrive.com/
UC300 / UCSB Combo voltage supply.
Page 1 of 1
Posted: Wed Feb 16, 2022 7:02 amRe: UC300 / UCSB Combo voltage supply.
Posted: Wed Feb 16, 2022 9:05 amNo, it is not OK.