Modbus Master - Saved settings location

[Soler]

HI,

After a recent hard drive failure which I have replace I have nearly got my UCCNC back up and running. My VFD was controlled by modbus master but when I restore my profile none of the setting from modbus master appear, I have access still to the original drive and I can recover the whole UCCNC older but I cannot find where these setting would have been stored.

Any help would be appreciated, before I try to recreate all the modbus settings that I had setup.

Thank you

[Soler]

Managed to solver it myself as the settings are saved at the end of the pro file.