forum.cncdrive.com

Hi, in version 1.2113 of UCCNC my UCR201 plugin is 1.4 beta and looking at version 1.2114 in the test relaease this jumps to V1.8 by the look of it, am i missing some newer version of the plugin since 1.2113 ? If so when will 1.2115 become the replaced stable version please?

Stay with 2.113 if you use probing
114 and 115 have a bug if ucr201 is used

The missing versions were not released.

dezsoe wrote:The missing versions were not released.

There's quite a few improvements in version 115 for the UCR201, the bug that's mentioned by Branden is this one particular thing if so depending what this maybe something I don't use?



UCR201 1.8
- Enable rewind with stop checkbox.
- Safety button mode to select MPG/keys/all.
- Tabbed window.
- Double-click on function button fields (F1..F5) to pop up a list of functions.
- Probe button can be configured to call M31 or Start probing.
- MPG mode button function can be selected (velocity+step/velocity/step).
- Axis button function can be selected (axis+FRO+SRO/axis).
- Holding the Axis button the axis/FRO/SRO can be selected with the MPG.
- SafeZ button now calls screen button 216 (which calls the M216 macro).
- [UCR201]/SafetyButtonLED=<LED number> can be set in profile to show safety button state.
- GetUSBDevice exception handled.
- Minor fixes.

The problem is not with the changes in UCR201 plugin but something in UCCNC. We try to do our best to find (and fix) the bug.

Hi, I'm looking at buying a UCR201 and am wondering if there are updates on this.

We already fixed the probing bug (that was in the UCCNC side not in the plugin, it was just related to the plugin), but my collegue also rewritting the whole communication protocol, because in some cases with very noisy environments (wireless transmittion noise) it cased issues, so he rewrites the encryption in the communication to make it more bulletproof. This will still take some time to finish, probably about 2 weeks or so.

Would existing UCR201 pendants need updated firmware?
Is there a way to update the pendants if required?

cncdrive wrote:We already fixed the probing bug (that was in the UCCNC side not in the plugin, it was just related to the plugin), but my collegue also rewritting the whole communication protocol, because in some cases with very noisy environments (wireless transmittion noise) it cased issues, so he rewrites the encryption in the communication to make it more bulletproof. This will still take some time to finish, probably about 2 weeks or so.

Tell me, will the problem be solved that in case of operation of SoftLimit, the suspension stopped moving axis in step mode?

The firmware will be updated automatically by the plugin.

Fixebr: I don't understand your question.