forum.cncdrive.com

Hello,
I am using UCCNC 1.2114 with axbb-e. when I try to probe e.g. outer corner with 3d touch probe or touch plate probe I randomly get the message "probe did not touch" and the probing process stops in random step
sometimes probing process works fine but most of the time stops with the message probe did not touch.
Both probes are connected to different pins and use different wires.
do you have any idea what could be the problem?
Thank you.

Juraj

Do you use the UCR201 pendant?

i have reported this as a bug to deszoe.
114 seemed to have introduced a race condition in probing. (LOTS OF PEOPLE HAVE MENTIONED IT TO ME)
113 works fine.

Any update on this issue? Will there be a fix?
Maybe version 1.2115 be released any time soon?

Dezsoe is on holidays till the 20th, he will reply then.

Any updates on this issue?

I think this
https://www.forum.cncdrive.com/viewtopic.php?f=3&t=4582&p=31681
is related.